Dimensions (H x W x D)

DC type: 160 mmx 86 mm x 45 mm

AC type: 160 mm x 86 mm x 70    mm (including the power bracket)

Weight (without adapter)

About 354g

Power supply to   the entire system

Adapter: 12V DC, 2A

PoF: 48 V DC, 0.5 A

NOTE

The copper cable in the

optical/electrical composite cable uses the PoE protocol to supply power and does not transmit data.

Rated input range of

the power adapter (AC configuration)

100 - 240V AC, 50/60 Hz

Power consumption

Static power consumption: 6.5W

lMaximum power consumption: 18.5W

Buttons

Reset button

Optical fiber interface

SC/UPC

Antenna Type

Built-in antenna

Storage

256MB FLASH, 1GB RAM

Installation Mode

l DC type: indoor junction box (86 mm) or wall-mounted installation

l AC type: indoor junction box (86 mm) installation

Operating
Ambient
Temperature

0°C - 40°C

Operating ambient humidity

5% RH to 95% RH, non- condensing

Degree of  protection

IP20

Surge Protection Specifications

PoF: 4 kV in common mode, 2 kV in differential mode

LAN: 2.5kV in common mode, 0.5kV in differential mode

POTS: 2.5kV in common mode

AC power supply: 6 kV in   common mode and 4 kV in differential mode

Interface

Network side: XGS-PON

l User side:

4*GE+1*POTS+2.4GHz&5GHz Wi-Fi 6

Indicators

Power/PON and LOS

indicator/WLAN/GE1-GE4/TEL

Certification

l SRRC/CQC/MIIT Network Access

l CE/RCM

l Wi-Fi Alliance

Support Protocols

IEEE 802.11b /g/n/ax(2.4GHz)

IEEE 802.11a /n/ac/ax(5GHz)

MIMO

2×2 MIMO (2.4GHz&5GHz)2dBi

Antenna gain

2dBi

Air interface rate

574 Mbps (2.4GHz)

2402 Mbps (5GHz)

Maximum number of SSIDs on the radio

4

Maximum number of users on the radio

A maximum of 64 per frequency band

Maximum transmit

power on the radio

2.4GHz: 23dBm

5GHz: 28dBm

Others

QAM, 160MHz bandwidth

WPA3, DL MU MIMO

XGS-PON port

Gigabit Ethernet port

Interface type: Hybrid SC (compatible with SC/UPC)

Transmission rate: 9.953 Gbit/s in the downlink and 9.953 Gbit/s in the uplink

Receiver sensitivity: -28 dBm

Overload optical power: –9 dBm

Type B (single-homing&dual-homing)

NOTE

If the optical power is greater than the overload optical power, the device may be damaged. In this case, connect an optical attenuator.

MAC address limit

MAC address learning

Gigabit Ethernet ports support 10 Mbit/s , 100 Mbit/s, and 1000 Mbit/s auto-sensing

POTS port

l Maximum REN: 4

l G.711A/μ, G.722 and G.729a/b encoding/decoding

l T.30/T.38/G.711 fax mode

l DTMF

l Emergency calls (with the SIP protocol)

USB port

usb

Network management

Layer 3 features

Visualized management

User-defined bandwidth allocation

Wi-Fi Optimization & Wi-Fi Roaming

Wi-Fi O&M

Intelligent identification and anti-jamming

Tunnel data forwarding using control and provisioning of wireless access points (CAPWAP) in FIT mode

Centralized Wi-Fi 6 ONU management and maintenance using the built-in AC of an OLT in FIT mode

PPPoE/Static IP/DHCP

NAT/NAPT

Port forwarding

ALG, UPnP

DDNS/DNS server/DNS client

IPv6/IPv4 dual stack, DS- Lite and IPv6 SPI

Static/Default routes

Multiple services on one WAN port

Smart service

Smart interconnection

Smart O&M

l Anti-squatter

l Scheduled Wi-Fi shutdown

l Smart Wi-Fi sharing: Portal/802.1x authentication; SoftRE-based sharing

l Smart Wi-Fi coverage

l SIP/H.248 auto-negotiation

l Any port any service

l IPTV video quality

diagnosis (VMOS&eMDI)

l Rogue ONT detection and isolation from the OLT

l Call emulation, and circuit test and loop-line test

l PPPoE/DHCP simulation testing

l One-click diagnosis (Web)

Multicast

QoS

Common O&M

Security

l IGMP v2/v3 snooping

l IGMP v2/v3 proxy

l MLD v1/v2 snooping

l Priority-based data

processing and forwarding based on the mapping and priority scheduling rules of  Wi-Fi Multimedia (WMM)

standards

l Supports WMM power

saving mode and Airtime scheduling

l Supports Airtime scheduling

l OMCI/Web UI/TR069

l Variable-length OMCI messages

l Dual-system software backup and rollback

l SPI firewall

l Anti-DoS attack

l Filtering based on

MAC/IP/URL addresses

l ONU Port-Level Hard- Isolated

WLAN Security

Power saving

l Open system authentication

l WEP authentication/encryption is supported. The encryption word length is 64-bit or 128- bit

l WPA2-PSK authentication/encryption (WPA2 Personal Edition)

L connected - 802.1 X authentication/encryption (connected Enterprise Edition)

l WPA3-SAE authentication and encryption (WPA3 personal edition)

L WPA3 802.1 X authentication/encryption (WPA3 Enterprise Edition)

l Supports WPA-WPA2 hybrid authentication

l Supports WPA2-WPA3 hybrid authentication

l Supports 802.1X authenticationand MAC address authentication

l Supports Wi-Fi management frame encryption

l Indicator power saving

l COC V8

IItem

Specification

Power bracket appearance

(including the adapter)

Power parameters

l 1-channel power input: 100–240 V AC, 50/60 Hz

l  1-channel power output: 12 V DC, 2 A

Power

24 W

Dimensions of power bracket (H x W x D)

160 mm x 86 mm x 25 mm (excluding screw holes)